FSPS - FFTF Dynamic for P3Dv31

FSPS - FFTF Dynamic for P3Dv3

Earn 48 Pilot Points
$23.99   product stock status

Delivery Option:
Instant Download + Disk Backup by mail ($4.95+Shipping)
Instant Download + 1GB USB Thumb Drive ($9.95+Shipping)
Instant Download
File Size: 40 MB

  • FSPS - FFTF Dynamic for P3Dv31


This version is for Prepar3D v3 (P3Dv3) only. You can Get The Prepar3D v4 (P3Dv4) Version Here.

If you own the FSPS - P3D Fiber Accelerator, you can upgrade to this FFTF Dynamic and Got 20% OFF by entering the coupon code FSPSFBRUPGD upon checkout. In order for this coupon code to work, you MUST have the qualifying product in your order history. Be sure to verify the coupon has been applied before completing your order because adjustments and refunds are not available once the order has been completed

FFTF… What a word. Actually, FFTF stands of the first letters of FIBER FRAME TIME FRACTION.

You want maximum framerates at detailed airports?
You want to avoid blurry terrain and have sharpness while flying?
You want the best value that balances between performance and image quality?
You do not want to change your settings while making a flight?

Well, you can make a lot of tests until you think that you have found it. You are happy, you have no blurries or stutters and frames are good. You start a flight (or you just changed vehicles) and enter another area to find your frame drops and stutters appear, or you see terrain blurries. So, you start all over again and again…

You can turn down your detail settings because of that detailed airport that brings down your frames. You can use less autogen and lower terrain settings when flying to avoid blurry terrain. Experienced simmers know that they can use different FFTF values for maximum frames or avoiding blurries.

What Does FFTF Do?
FFTF actually determines the maximum amount of time per frame that will run fiber jobs on the primary thread. Performance of the Flight Simulator is greatly affected by the amount of time CPU spending between foreground operation and background data scenery loading.

The lower the frame rate is set, the more CPU time is devoted to loading scenery and texture.

FIBER FRAME TIME FRACTION is a direct command that helps tune the amount of time per frame that CPU runs fiber jobs The default value of it is 0.33, meaning that the CPU will spend 1 millisecond to scenery loading in every 3 milliseconds of rendering. So, the lower the value, the better the frame rate but also the more the blurries.

What if the FIBER FRAME TIME FRACTION is not static, but dynamic? Sounds great if can be done. It can solve all the above mentioned problems. But can it be done? Of course it can!

We present to you the Dynamic FFTF program
  • An application which covers every aspect of user configuration, including
  • Unlimited frames + VSync enabled + TB enabled
  • Unlimited frames + VSync enabled + TB enabled + external limiter
  • Unlimited frames + VSync disabled + TB disabled
  • Locked frames (VSync + TB settings are ignored )
There are two options for dynamic FFTF calculation. Frames range and AGL height range.

Frames Range
Suggested for unlimited frames + VSync disabled + TB disabled. You set the minimum and the maximum frames + FFTF range + times you want FFTF to be updated per sec to Flight Simulator.

An example can be: Min frames=24, Max Frames=28, FFTF minimum=0.05, FFTF maximum=0.33, times to update per second=1. In this case at 24 frames FFTF will be 0.05, at 26 frames FFTF will be around 0.19 and at 28 frames, FFTF will be 0.33. Below minimum frames set, FFTF will always be 0.05 while above max frames set, FFTF will always be 0.33.

AGL Height Range
Suggested for the rest. You set the minimum and maximum AGL altitude + FFTF range. (Times to update per second is not available for AGL height option).

An example can be: AGL Min=0 feet, AGL Max=5000 feet, FFTF minimum=0.05, FFTF maximum=0.33. In this case at 0 feet FFTF will be 0.05, at 2500 feet FFTF will be 0.19 and at 5000 feet, FFTF will be 0.33. Above 5000 feet FFTF will always be 0.33. Every time that the application calculates the new FFTF, it immediately updates the new FFTF value to Flight Simulator. This is the main reason that we do not need any timer option in this case.

Most simmers now know about FTFF and what it does. Many of them use FFTF values from 0.1 or 0.01, but many of them suffer from blurries when flying as a result.

This program solves it all!

  • Flight Simulator
    • Lockheed Martin's Prepar3D (V1, V2, V3)
  • Operating System
    • Windows XP SP3
    • Windows Vista
    • Windows 7
    • Windows 8
    • Windows Win 10 (32 / 64 bit)
  • Microsoft's NET Framework 4.6
  • Up and running internet connection for activation and license checking of the product on each application's start-up.
  • PDF viewer application for reading the manual.

Product Tags:
This product was added to our catalog on Thursday 12 April, 2018.
Related Products
FSPS - Real 3D Cockpit Effect

FSPS - Real 3D Cockpit Effect

@ $7.70

FSPS - Frictionality P3D

FSPS - Frictionality P3D

@ $10.90

FSPS - Sim Physics X/P3D

FSPS - Sim Physics X/P3D

@ $26.50

FSPS - P3D Booster Live 2018 for P3D v1, v2 and v3

FSPS - P3D Booster Live 2018 for P3D v1, v2 and v3

@ $13.95

Customers who bought this product also purchased
0 items
Developers & Brands
Write a review on this product!
Over 8,000 Product Reviews Online!