FSPS - FSX Fiber Accelerator1

FSPS - FSX Fiber Accelerator

Earn 33 Pilot Points
$16.50   simulation product in stock

Delivery Option:
Instant Download + Disk Backup by mail ($4.95+Shipping)
Instant Download
File Size: 19 MB

  • FSPS - FSX Fiber Accelerator1
  • FSPS - FSX Fiber Accelerator1
  • FSPS - FSX Fiber Accelerator1
  • FSPS - FSX Fiber Accelerator1


FSX Certified

Includes version 1.4

This Product is for FSX Only. You can get the Prepar3D version from here: Prepar3D Version

Now Supports FSX Steam Edition

Flight Simulator Platform Solutions presents FSX Fiber Accelerator, a product that will take FSX again to the top, where it belongs!

FSX tweaking over the years was made -mostly- by making changes to the fsx.cfg. That is the FSX settings file.

All changes - despite how good - were static. As in when you load FSX these changes stay until you quit FSX and insert another tweak again.

This led to problems: Either you had found a perfect setup for around a heavy airport but lose graphics quality on other places, or you had found the perfect setup for high level flying but when close to the ground things went bad, or you had a "just average" all-around set up.

How about forcing FSX to be more clever and provide it with a way to keep frame-rates high at the best possible graphics quality, or lower frames to keep up with the graphics demand , according to your needs?

Dear Simmers, FSX Fiber Acclerator is here ! For the first time in FSX, we are directly, in real-time, dynamically inserting FSX tweaks without touching fsx.cfg. Using revolutionary techniques we draw power from where you DON'T need it (for example while you are on the ground, we get power from drawing graphics 80 miles away) and bring you this power to where you DO need (for example to get better frame rate and better graphics quality around the airport).

By - in other words - rewriting the FSX graphics engine, FSX now gives the Simmer what he needs, when he needs it!

Better frame rates, better graphics quality, faster texture loading and smoothness in motion all together in the same flight! Maximizing the CPU and GPU power for FSX was never easier.

Doing what? Like updating FSX with a new fsx.cfg every millisecond !

How it works

You start FSX and set a "Target Frame Rate" in settings. (This will be the top frames per second FSX will get on the less demanding situations) You start FSX Fiber Accelerator, and you set a - Lower - Target Frame Rate. This will be the number of frames FSX will try to catch up, according to your needs, lowering graphics quality (gradually from places you cannot see anyway, moving closer to your position). You then go to the hardest airport you own (i.e. the highest detailed airport or most frame-killer you have). There you can test the settings until you find the best one. That's it.

All the work is applied afterwards by FSX Fiber Accelerator and it will work perfectly on all other airports as you configured it, including for your 'worst possible scenario'. Next time you just start FSX and FSX Fiber Accelerator... Nothing more to do! Made to be as simply as possible - just start it-and-forget it.

Main Features
  • Best possible FPS at any given situation with maximum possible graphics quality
  • Best possible graphics in FSX according to the frame rate you set for the hard cases
  • Best possible smoothness on texture loading even during the hardest viewpoint change
  • Maximum CPU and GPU allocation to FSX during the whole flight
  • Dynamically applying (every millisecond) the best possible tweaks to your FSX

The new features from version 1.2 come directly from customer's demands. You have put Fiber Accelerator at the top of the Best selling products in such a short time, it was our duty to listen to you!

What it cannot do? Well it is not buying you new hardware. It just makes absolutely sure that the system you have will present FSX to the peak - as best as it can do. To hard to believe it?

We agree. Download the demo from HERE to get the free try-before-you-buy chance to believe... (5 single uses of the application , for 5 minutes each) Do your tests where you know you PC barely makes it, and be amazed by the results.

Then we are sure, we will welcome you to FSPS family as the only possible next step would be you become a proud owner of FSPS - FSX Fiber Accelerator .

Requirements section
FSX Fiber Accelerator, can run on any PC that is able to run Microsoft's FSX

  • Windows: XP SP3 / Vista / Win 7 - 32 or 64 bit / Win 8 / Win 10
  • Flight Simulator - Service Pack 2 or Acceleration or Steam Edition
  • Microsoft's NET Framework 3.5 SP1
  • Latest Version of FSUIPC by Peter Dowson. (Registered or unregistered)
  • Up and running internet connection for activation and license checking of the product on each application's start-up
  • PDF viewer application for reading the manual
FSX Fiber Accelerator is compatible with ALL tweaking applications (i.e. FSX Booster 2013) , ALL tweaking guides available on webpages or forums, ALL websites that use web-services where user could submit his PC specs and get back a recommended fsx.cfg etc…

  • One active installation on only one PC at any given time. (Checked via online validation after every installation.) Users can have the application installed on multiple computers moving the active license around, using the "Transfer License" function.
  • FSX Fiber Accelerator must run on the FSX PC in order to communicate directly with FSX.

Exchanges and Refunds not permitted. This Product is for FSX Only. You can get the Prepar3D version from here: Prepar3D Version

Changes in version 1.3.7 include

  • Support latest FSX Steam Update

This Product Requires Online Activation

Product Tags:
Current Reviews: 13
This product was added to our catalog on Thursday 03 July, 2014.
Customers who bought this product also purchased
0 items
Developers & Brands
FSPS - FSX Fiber Accelerator
Anyone who may possibly use the 1/2 refresh rate in Nvidia I ..
5 of 5 Stars!
Over 8,000 Product Reviews Online!