Milviz - MV MD530F Full Pack for FSX & P3D1

Milviz - MV MD530F Full Pack for FSX & P3D

[MVZ-190]
Earn 80 Pilot Points
$39.99   product stock status

Delivery Option:
Instant Download + Disk Backup by mail ($4.95+Shipping)
Instant Download + 1GB USB Thumb Drive ($9.95+Shipping)
Instant Download
File Size: 295 MB


  • Milviz - MV MD530F Full Pack for FSX & P3D1
  • Milviz - MV MD530F Full Pack for FSX & P3D1
  • Milviz - MV MD530F Full Pack for FSX & P3D1
  • Milviz - MV MD530F Full Pack for FSX & P3D1
  • Milviz - MV MD530F Full Pack for FSX & P3D1
  • Milviz - MV MD530F Full Pack for FSX & P3D1
  • Milviz - MV MD530F Full Pack for FSX & P3D1
  • Milviz - MV MD530F Full Pack for FSX & P3D1
  • Milviz - MV MD530F Full Pack for FSX & P3D1
  • Milviz - MV MD530F Full Pack for FSX & P3D1
  • Milviz - MV MD530F Full Pack for FSX & P3D1
  • Milviz - MV MD530F Full Pack for FSX & P3D1
  • Milviz - MV MD530F Full Pack for FSX & P3D1
  • Milviz - MV MD530F Full Pack for FSX & P3D1

Compatibility?

FSX Certified
FSXSteam
Prepaid 3D

Updated August 14th, 2018 - Includes version 1.180709 See Notes Below

Important: Please note that all of the current default analog and digital avionic equipment installed in Milviz's general aviation aircraft and helicopters is based on underlying simulator code and as such, is subject to various deficiencies which are not able to be addressed by their team. This includes our GNS 530 / 430 units, audio panel, transponder, ADF unit, and nav/com radios. Due to the inherent limitations present in the simulator, Milviz is therefore unable to provide fixes or support for any issues related to the operation or functionality of these items at this time.

The MV MD530F for FSX, P3D v1.4, P3D v2, P3D v3 and P3D v4

This versions includes all versions of the MVMD530F for FSX and P3D v1.4 and P3D v2 as well as the Addon Pack, F1 Avionics and Mindstar Avionics.

Ready for any challenge.

Belonging to the MD 500 series, the MD 530F is a five-place, single-engine, multipurpose helicopter with a fully-articulated five-blade main rotor system, and a two-blade tail rotor for anti-torque. The teardrop-shaped, aerodynamically efficient fuselage features an unobstructed forward 160-degree vertical and 220-degree horizontal cockpit field of view.

Equipped with a 650 shp Rolls-Royce Model 250-C30 turboshaft engine, the MD 530F is extremely effective in hot-day and high-altitude operation.

It's typical mission profile includes executive and personnel transport, air medical services, airborne law enforcement, along with many other operations where it's class-leading performance is a required asset.
  • Maximum speed: 152 knots (175 mph, 282 km/h)
  • Cruise speed: 125 knots (144 mph, 232 km/h)
  • Range: 375 mi (605 km)
  • Service ceiling: 16,000 ft (4,875 m)
  • Rate of climb: 1,700 ft/min (8.6 m/s)
Introducing the Milviz MD 530F

We are very pleased to offer you our version of the versatile MD 530F helicopter, with support for multiple platforms, including all versions of FSX and P3D.

Top Of It's Class

This release brings together everything you've come to expect from Milviz; extremely detailed modelling and refined graphical excellence, superb night lighting, smoothly modeled gauges, highly accurate systems, realistic avionics and excellent flight dynamics. As with all of our releases, our goal with the 530F is to get you as close as possible to the real machine.

Choose Your Fit

Like the workhourse that the real 530 is, the Milviz 530F can be configured with several optional equipment configurations. Included with your purchase, these options give you the flexibility to outfit your 530 to match real world tasks. Selectable options include:
  • Top and Bottom Wire Cutters
  • Cargo Hook
  • Night Sun
  • FLIR Camera
  • Carry Pod
  • Emergency Floats
While the Cargo Hook, FLIR Camera and the Carry Pod are purely cosmetic options for your helicopter, the Night Sun is completely controllable through key commands, and the Emergency Floats really do their job, allowing you to land on water without sinking.

In addition, all options are able to be set per livery through our Aircraft Configuration Manager, allowing you to outfit your 530 fleet in any way you want.

Choose Your Radios

With the Milviz 530F, we've tailored our avionics panel around the idea of choice. Included with the helicopter is our own very highly detailed GNS units, but we've also crafted one-click compatibility for a range of popular 3rd party GPS addons:
  • Reality XP 530 GNS
  • Reality XP 430 GNS
  • Mindstar 530 GNS
  • Mindstar 430 GNS
  • Flight1 750 GTN
  • Flight1 650 GTN
Please note that compatibility for the above gauge packages includes support for installation and setup of our product only; use of any of the offered options requires a functional existing installation of the appropriate gauge. In addition, any gauges we list compatibility for are not included with the Milviz 530F.

Use of any 3rd party avionics package in any desired simulator is also of course restricted to the availability of the avionics package for that simulator. Please see the respective manufacturers websites for platform compatibility.

Choose Your Livery

We are very pleased to provide with this package one of the largest selections of liveries we've ever offered, created not only by our own talented artists, but also by some of the best texture artists in the flight sim community. A choice between 18 highly detailed liveries means that you get a wide variety of helicopters to take your next flight in!

Stand-alone Configuration Manager

This package includes our Aircraft Configuration Manager, a stand-alone program which allows you to easily set your preferred options per livery. Not only are choices available pertaining to gauge placement and external option visibility, but you are also able to set your preference between having the helicopter load in a 'Cold and Dark' state, or having it load up with the blades spinning, ready to fly.

The ability of setting these options per livery means that you don't have to choose a single static setup for your entire hangar; you can configure any livery with any combination of options in order to always have a 530 ready for whatever you have the time for!

Single Purchase, Multi-Platform Use

The Milviz 530F package now supports a wide range of platforms, in a single, downloadable installer:
  • FSX: Acceleration
  • FSX: Steam Edition
  • Prepar3d v2
  • Prepar3d v3
The Milviz 530F package also now includes addon and avionics options that were, at one time, seperate purchases. These have now been included in the multi-installer. In addition, the 530 installer also has a new format that eases installation, letting the user select which platform to install to, as well as what avionics options are to be installed.

System Requirements (Minimum):
  • Windows
    • Vista
    • 7
    • 10
      • (use in all other versions of Windows is unsupported)
  • Flight Simulator
    • Microsoft Flight Simulator X DVD Version (FSX)
    • Microsoft Flight Simulator X Steam Edition (FSXSE)
    • Lockheed Martin Prepar3D v1, v2, v3, v4
  • Processor: 2.6 Ghz or higher
  • Memory: 4 GB RAM
  • Graphics: DirectX®11 compliant video card, 1024 MB video RAM or higher
  • Hard Drive: 1.2 GB available space
  • FSX Version: FSX:Acceleration or FSX:Steam Edition
  • P3Dv2 Version: Latest release, with all hotfixes.
  • P3Dv3 Version: Latest release, with all hotfixes.
Special Features:
  • Realistic flight dynamics by Chuck Jodry
  • Choose between Cold and Dark or Ready to Fly startup states
  • Custom DX10/DX11 night lighting
  • Custom configuration utility to set model and avionics options per livery
  • 18 high quality liveries included
  • Support for 3rd Party Avionics (RealityXP, Mindstar, Flight1)
  • Realistic sound set
  • Custom 3D gauges and avionics
  • High quality external and internal models
  • Detailed Milviz GNS 430/530
  • Highly detailed product manual included
Warning: All Anti-Virus programs or software must be disabled before downloading and installing these products. Failure to do so may result in a faulty or non-functioning installation. False positives are very common and are not to be mistaken for actual viruses. We guarantee that there are no viruses present in our products.

Important: Please note that all of the current default analog and digital avionic equipment installed in Milviz's general aviation aircraft and helicopters is based on underlying simulator code and as such, is subject to various deficiencies which are not able to be addressed by their team. This includes our GNS 530 / 430 units, audio panel, transponder, ADF unit, and nav/com radios. Due to the inherent limitations present in the simulator, Milviz is therefore unable to provide fixes or support for any issues related to the operation or functionality of these items at this time.

Notes on Update v1.180709
This update [180709] addresses trim issues, adds a Force Trim option, and fixes the missing wire-cutters in P3D.

From the Milviz Lead System Engineer
To use the new force trim option use the AMS and click on the new "Controls" section for the 530, and assign a key or button to the force trim trigger.

When you are in the cockpit, you must enable the force trim by using the two previously unused switches labelled OVSPD TEST and FAULT TEST. The one on the left turns on the force trim system when in the Up position. The one on the right enables the force trim to work with the rudder too when UP.

With a key assigned in AMS and both switches up, a press on the force trim button will make the current cyclic and rudder petal settings the new center point. Thus as soon as you press force trim, return the joystick (and rudder if you have that switch up) to the neutral position. The helicopter should retain its current trim. You can use force trim as often as you'd like.

In case you are unfamiliar with it: Force Trim is not an autopilot! Be sure the helicopter is in a stable condition when you push the button. If it's rotating or banking, you'll simply lock in that trend and have to fight it. (This is how it really works, it takes some getting used to.)

This can take a great deal of the work out of flying. The real MD530 did not have a force trim, we're adding it as a optional "quality of life" enhancement.

~ Dutch"


Product Tags:
Current Reviews: 1
This product was added to our catalog on Friday 12 December, 2014.
Customers who bought this product also purchased
SHOPPING CART
0 items
MANUFACTURER INFO
BEST SELLERS
SPECIALS
Developers & Brands
Recently Viewed
Recently Viewed
(last 9 items)
Do not display again  Erase Your Recently Viewed Items  
Drzewiecki Design - New York City X v2
CH Products - Throttle Quadrant
simPlugins - Panel Builder Add-On Grob109B
Azurafiles - Aeroshot Image Capture
VR Insight - Tact & Toggle Switch Panel (TT Panel)
WeFly Works - Metar Pro Utility for FSX
FSGenesis - Alaska-Hawaii Terrain Mesh FSX
A2A - Piper J-3 Cub
MegaScenery Earth - Ultra Res Cities Buffalo
Customers who bought products in your Recently Viewed Items
also purchased:

REX SkyForce 3D for FSX and P3D