vFlyteAir - Cherokee 140 Classic for X-Plane1

vFlyteAir - Cherokee 140 Classic for X-Plane

Earn 48 Pilot Points
$23.95   product stock status

Delivery Option:
Instant Download + Disk Backup by mail ($4.95+Shipping)
Instant Download + 2GB USB Thumb Drive ($9.95+Shipping)
Instant Download
File Size: 1478 MB

  • vFlyteAir - Cherokee 140 Classic for X-Plane1
  • vFlyteAir - Cherokee 140 Classic for X-Plane1
  • vFlyteAir - Cherokee 140 Classic for X-Plane1
  • vFlyteAir - Cherokee 140 Classic for X-Plane1
  • vFlyteAir - Cherokee 140 Classic for X-Plane1
  • vFlyteAir - Cherokee 140 Classic for X-Plane1
  • vFlyteAir - Cherokee 140 Classic for X-Plane1
  • vFlyteAir - Cherokee 140 Classic for X-Plane1
  • vFlyteAir - Cherokee 140 Classic for X-Plane1
  • vFlyteAir - Cherokee 140 Classic for X-Plane1
  • vFlyteAir - Cherokee 140 Classic for X-Plane1
  • vFlyteAir - Cherokee 140 Classic for X-Plane1
  • vFlyteAir - Cherokee 140 Classic for X-Plane1
  • vFlyteAir - Cherokee 140 Classic for X-Plane1



Includes Beta Version To Support X-Plane 11 (11Beta1)

Includes version 2.1

This is the IFR version of the 140, and it is the same as the Original except that the instrument panel is IFR-capable and it has an STEC 55x autopilot. The Classic version can perform ILS and RNAV approaches - it has the X-Plane g430 GPS, two COM radios, two NAV radios, two OBS heads, STEC 55x autopilot and an ADF receiver (for countries where ADF is still commonly used). We suggest this version for those who like to fly IFR with autopilot control. Comes with five liveries, all based on real world paint schemes.

Save $10 when you buy both the Classic and Original version!

Changes in Version 1.1 Include

Be aware that the SASL plugin requires that Microsoft Visual C++ Redistributable be installed on Windows. It can be downloaded from here: In most cases, the Visual C++ Redistributable will already be installed.

New Features
  • Copilot door now operates per the Piper Cherokee 140 Owner's Handbook. You must click the UPPER door latch to unlock the door, then click the LOWER door handle to open or close the door. When you click the upper door latch, the door will open slightly and remain that way until the latch is clicked again to lock it. If you accidentally leave the door fully open while taxiing or during take-off, the door will shut automatically, but will not latch until you click the upper door latch. (BOTH versions)
  • Added new labels to the radio stack to indicate where the "master sim volume (MSTR SIM VOL)" volume knobs are located. These volume knobs control the engine sounds, weather sounds, and ground contact sounds. The MSTR SIM VOL can be used even when the "headphones" are plugged in. (BOTH versions)
  • Added new sounds for the fuel primer lever. (BOTH versions)
  • The pilot figure is hidden in exterior views upon start-up with a cold and dark airplane. If you release the parking brake, turn on the Master Switch, or if the engine is running, the pilot will be displayed. (BOTH versions)
  • Created a new command for the "Master Switch (Battery/Alternator)" that can be assigned to a joystick button or keyboard key combination.
Bug Fixes
  • Autopilot will now properly intercept and track ILS approaches and GPS flight plans and RNAV approaches (CLASSIC version)
  • Improved the reported left roll tendency at cruise speeds (torque roll) (BOTH versions)
  • Added all available liveries to both versions (BOTH versions)
  • Exhaust smoke is now located at the outlet of the exhaust pipe instead of forward of the airplane (BOTH versions)
  • Powering off Radio #1 and Radio #2 no longer causes the fuses to pop out (ORIGINAL version)
  • Increased the rolling tire friction coefficient to reduce the "skittish" behavior when landing or taking off (BOTH versions)
  • If the copilot seat back is down when you select "Add Copilot," the seat will automatically be placed back into the upright position (BOTH versions)
  • Propeller now displays properly regardless of how the pilot shuts off the engine (BOTH versions)
  • The starter button is now de-coupled from the magneto switch - the magneto switch is now not affected by starter operation (BOTH versions)
  • Panel flood light is now red instead of white (BOTH versions)
  • Added TO/FROM indicators to the CDI instruments (CDI #1 on the Original version and CDI #2 on the Classic version)
  • Added new drag-axis manipulators to the OBS knobs and the HDG knob (Classic version). These are in addition to the "click-left and click-right" manipulators. Makes it easier to make large adjustments with the "click and drag" manipulator, then fine-tune with the "click" manipulators. The OBS knob manipulators now allow multiple rotations left and right. (BOTH versions)
  • Changed the Garmin 430 NAV manipulators to use the proper g430 datarefs (CLASSIC version)
  • The ALT and GS indicators on the STEC55X now work per the STEC manual when in APPR mode (CLASSIC version)
  • Added Speed and Distance LEDs to CDI #1 gauge for GPS source (CLASSIC version)
Changes in Version 1.2 Include:

  • Adjusting the radio volume knobs now reduces the volume on the NAV-aids Morse code audio as well as the COM radios
  • You can now turn OFF the Garmin 430 power by using the upper small knob marked "C" and rotating it all the way left - the lower knob marked "V" controls the NAV1 Identification Morse code volume
  • User's menu settings for sound volumes will be restored when unloading the Cherokee and loading another aircraft
  • The Starter Fuse no longer pops out during engine start
  • The propeller will not turn when the engine starter fuse is pulled and the starter button is pressed
  • The radio volume now properly controls the NAV audio volume
  • The g430 GPS NAV frequencies are now controlled by the g430n1_frequency_xxx datarefs
  • The ignition key receptacle texture was rotating when starter button pushed - now only rotates with magneto setting as it should
  • Roll and pitch rates dampened to provide more realistic flight
  • Fixed the fuel tank indices so that left wing tank is [0] and right wing tank is [1]. This makes fuel tank selection compatible with other plugins.
  • The STEC55 autopilot now displays "ALT" and "GS" properly when intercepting and engaging an ILS Glide Slope
Changes in Version 2.0 Include
  • NEW - Compatible with X-Plane 10.50 or newer ONLY!
  • NEW - All instrument panel knobs now support mouse scroll-wheel manipulation
  • NEW - Radio audio volumes now controlled separately - COM1, COM2, NAV1 and NAV2 volume knobs control their respective audio volumes. The Audio Panel volume knob controls ADF, DME and MRKR volumes.
  • NEW - New on-screen situation-aware warnings - including "Open Throttle 1/2" During Engine Start," "Adjust Mixture," "Close and Latch Passenger Door," "Remove Wheel Chocks," "Left Fuel Tank Low," and "Right Fuel Tank Low"
  • NEW - Improved custom sounds with new external engine/prop sounds and simulated Doppler effect
  • FIXED - Static propeller now rotates properly during engine start regardless of the computer speed
  • FIXED - Instrument lights brightness can be changed using the rheostat located at upper right on OBS #1
  • FIXED - User Sound Settings in X-Plane menu are now preserved when airplane is unloaded.
Includes Patch Kit for XP11 Beta users that includes new textures and OBJ files with new XP11 features

11Beta1 Version Includes The Following Updates For X-Plane compatibility
  • New NORMAL textures for exterior objects to provide X-Plane 11 compatible surface reflections and specular highlights
  • Modified OBJ object files to support the new surface reflections and specular highlights
  • New exterior and interior glass objects to support reflections and specular highlights
  • New X-Plane 11 style icons designed for the Flight Configurator
  • Modified various settings in PlaneMaker 11 to improve performance in X-Plane 11
What's missing for X-Plane 11
  • Our models do not yet support the new X-Plane 11 FMOD sound engine (however, the SASL plugin sounds still work in X-Plane 11)
  • Conversion of plugin code to the natively-supported XLUA plugin is not completed
Be sure to choose the correct version of this vFlyteAir model for installation. Choose the "version 11Beta1" for X-Plane 11.
Thank you for being a vFlyteAir Customer!

Product Tags:
This product was added to our catalog on Tuesday 17 May, 2016.
Special Bundle Savings

Buy vFlyteAir - Cherokee 140 Classic for X-Plane more and vFlyteAir - Cherokee 140 Original for X-Plane more


together for only

You save $12.95 28%
(Receive your discount at checkout)
Customers who bought this product also purchased
0 items
Developers & Brands
Write a review on this product!
Over 8,000 Product Reviews Online!